Toshiba e-STUDIO 2000AC Copying Manual page 116

4.USING IMAGE ADJUSTMENT FUNCTIONS
4 Adjust the red color balance or the red-and-black range.
 Red in original
Press or
 Range Adjustment
Press or
copied in red becomes larger. When you set the black area to be larger, the area to be copied in black becomes
larger.
After completing the adjustment, press [OK]. This is the end of the setting.
If you want to adjust color balance of yellow and magenta on every density area, press [Detail] and go to the next
step.
Press or
5
For example, when you adjust the high density area of magenta (M) to the
density area will become darker.
After completing the adjustment, press [OK].
 Canceling color balance adjustment
 Move the indicator of the color whose adjustment you want to cancel to the middle, and then press [OK].
 If you want to cancel the adjustment of all colors, press [Reset], and then [OK].
116 Applying Twin Color Copying (Color Model only)
of yellow or magenta to adjust the red color balance.
to adjust the red-and-black range. When you set the red area to be larger, the area to be
on each density area to obtain the desired color balance.
side, the magenta in its high