Toshiba e-STUDIO 2000AC Copying Manual page 113

4.USING IMAGE ADJUSTMENT FUNCTIONS
3 Select a color for the black part in the original.
Press [Change Black To], and select the desired color.
Select a color for the parts other than black in the original.
4
Press [Second Color], and select the desired color.
After selecting the color, press [OK]. This is the end of the setting.
If you want to adjust the color balance, press [Adjust] and go to the next step.
 When the two colors specified are the combination of black and a color other than black, color balance
adjustment is enabled. When neither of the two colors is black, or when both of them are black, this
adjustment is disabled.
 The color balance of a color other than black can be adjusted.
5 Press or
After completing the adjustment, press [OK]. This is the end of the setting.
If you want to adjust each color balance on every density area, press [Detail] and go to the next step.
of the color to obtain the desired color balance.
Applying Twin Color Copying (Color Model only) 113