Xerox WorkCentre 7220 User Manual page 66

Paper and Media
2. Ensure that the guide locks are set in the correct position for the size labels you are loading. For
details, see Setting the Guide Locks in the 500-Sheet Adjustable Trays
Note: Trays 1–4 accept Standard Labels, Heavyweight Labels, and Extra Heavyweight Labels
(106–256 g/m²).
− For long-edge feed, load labels face up with the top edge toward the front of the tray.
3. For short-edge feed, load labels face up with the top edge facing to the right.
4. Close the tray. Set the paper size, type, and color at the control panel. For details, see
Paper Size, Type, and Color
Loading Labels in Tray 5
1. Open tray 5, then pull out the extension tray for larger sizes. If the extension tray is already opened,
remove any paper that is a different size or type.
®
66 Xerox WorkCentre
User Guide
on page 60.
®
7220/7220i/7225/7225i Color Multifunction Printer
on page 59.
Changing