Gigaset Maxwell 3 Manual page 39

Hide thumbs Also See for Maxwell 3:

Table of Contents

Telephony

Changing the standard send connection

If the telephone has more than one VoIP connection, outgoing calls are initiated via the standard

send connection (

Changing the standard send connection:

Settings

Telephony

All the configured connections are shown. The check box

shows which connection is currently selected.

Check the connection required

Only active connections can be selected.

If the standard send connection selected cannot be accessed, use another connection:

Set the switch next to SIP Accounts-Failover to Yes

Settings for Call Waiting

Specify the telephone's response when another call comes in during a call.

Settings

Telephony

For each connection:

Prevent/permit Call Waiting:

Select the option under Display Waiting Call (

deselect (

= Call Waiting not permitted)

Permit Call Waiting:

Select Acoustic signal from the list

Off: the incoming call is shown in the display only

or signalling with a Call Waiting tone (beep): once or every 4, 10, or 20 seconds

Save the settings:

Configuring other settings with the Web configurator

p. 13).

Connections

Set

Call Settings

Set

under Default send Connection

= Call Waiting permitted) /

Table of Contents