Table of Contents
Advertisement
Making calls
Incoming calls
An incoming call is indicated by ringing, by a display on the screen and by the flashing Status
LED.
The display shows
•
Incoming Call in the header
•
the caller's name if it has been stored in the
directory
•
the caller's number if it has been transmitted
(
p. 15)
•
the line on which the call is coming in on
•
a picture of the caller, if one has been transmitted
(CNIP)
Accepting the call:
Switching the ringtone off:
Rejecting the call:
If the call is a ringback, Ringback is displayed in the header.
When a call comes in, the system looks for a matching entry in the local directory. If
the number is not found there, other directories are searched, if any have been
configured.
Protection from incoming calls
Activating/deactivating the ringtone
An incoming call is not signalled by ringing, but is displayed on the screen.
Switching the ringtone on/off:
Ringtone is switched off: the following icon appears on the display
Ringtone silencing for anonymous calls:
Switching the alert tone (beep) on/off
Switch on an alert tone (beep) instead of the ringtone:
¤
Press and hold the Star key
appears in the status line
Switching off the alert tone:
16
¤
lift the handset
¤
Silence
¤
Reject
Press and hold the Star key
press Beep within 3 seconds . . . the following icon
Press and hold the Star key
Incoming Call
Peter Smith
089123456789
Reject
p. 32.
12:15
(
)
(
)
089123456789
via
1
IP1
Silence
Advertisement
Table of Contents
