Gigaset Maxwell 3 Manual page 20

Making calls
Call swapping
Switch back and forth between two participants. The other call is placed on hold.
¤
Call a second participant during an external conversation (consultation call) or accept a
waiting call . . . use Swap to switch between the participants
Ending the connection to the active participant:
¤
End . . . the connection to the participant on hold is reactivated
Other ways of ending the call-swapping session:
•
Replace the handset
another.
•
The active participant ends the conversation: The connection to the participant
on hold is reactivated
•
The participant on hold ends the conversation: The connection to the active
participant remains active.
Conference call
Speaking to two participants at the same time.
Initiating a conference call during a conversation:
¤
Press the Conference call key
participant . . . the conference is established as
soon as the call is accepted
Initiating a conference call from call swapping:
¤
Press the Conference call key
participant and the participant on hold will be
switched into the conference
Ending a conference call:
¤
End or replace the handset
Transferring a call
Connecting both external participants to one another during call swapping or in an external
consultation call:
¤
Replace the handset
If the active participant does not accept the call, a recall will be initiated by the participant on
hold.
20
: The other two participants will be connected to one
call second
. . . the active
. . . the conference ends for all the participants
. . . the call on hold will be transferred to the active participant.
Conference
00499876543...
Susan
End
12:15