Turning On Bluetooth; Turning Off The Bluetooth; Re-Pair Timer - Motorola APX 6000 User Manual

Note:
It is recommended to use Motorola proprietary
Mission Critical Wireless (MCW) devices with
APX radios during Mission Critical operations
as other Bluetooth
meet the mission critical standard.
Your radio must be preprogrammed to allow
you to use this feature.
The use of this feature requires the "Full
Feature" expansion board together with the
Bluetooth Software.
The default setting for Bluetooth-enabled radio is
Bluetooth on. See
70 to turn off the Bluetooth.
Currently your radio supports the following Bluetooth
devices or profiles.
• Headset (HSP)
• Dial Up Networking (DUN)
• Personal Area Networking (PAN)
• Serial Port (SPP)
• Generic Access Profile (GAP)

Turning On Bluetooth

70
English
®
devices may or may not

Turning Off the Bluetooth

on page
Turning on the Bluetooth via the preprogrammed
button:
a) Press the preprogrammed button to turn on the
Bluetooth.
You hear a short, medium-pitched tone. The
display shows momentarily BT ON, and
appears.
If Bluetooth fails to launch, the display shows
BT ON FL.
Turning Off the Bluetooth
Turning off the Bluetooth via the preprogrammed
button:
a) Press the preprogrammed button to turn off the
Bluetooth.
You hear a short, medium-pitched tone. The
display shows momentary BT OFF and
disappears.

Re-Pair Timer

There are two options for configuring the Bluetooth
pairing type of the radio. The type defines the