Using Tps Emergency Transmission; Man Down - Motorola APX 6000 User Manual

Hide thumbs Also See for APX 6000:
Table of Contents

Advertisement

Press PTT button to transmit. Talk clearly into
the microphone. Release PTT button to listen.
Receive and listen to call, the radio displays the
caller's name or ID.

Using TPS Emergency Transmission

The following are two important alert tones designed
for this feature.
Emergency
Beacon
Emergency
Call De-Key
Sidetone
56
English
During Emergency if the TPS radio
user pushes the Emergency button,
the radio sounds a Beacon at the
maximum volume of the radio at
radio's internal speaker and it is not
adjustable. This beacon goes to
silent when user presses the PTT
button for voice transmission.
The radio sounds an alert tone to
remind radio user that the
Emergency Mode is still active after
user releases the PTT button for an
Emergency call transmission. The
volume of loudness depends on the
maximum tone at your radio profile.
1 Press the Emergency button to enter Emergency
Mode.
You hear Emergency Beacon.
2 Press PTT button to make Emergency Call.
3 Release to listen.
You hear Emergency Call De-Key Sidetone. After
a short pause, you hear Emergency Beacon.
4 Long press Emergency button to exit Emergency
mode and cancel Emergency Beacon.

Man Down

Man Down condition is determined based upon the
radio tilt angle or a combination of radio tilt angle and
the lack of radio motion.
Man Down feature is an alternate way to activate the
Emergency feature if Emergency has been
programmed in your radio.
Note:
This feature could be preprogrammed for all
channels that support Emergency feature or
could be preprogrammed specifically to a zone
and channel which has Emergency feature.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apx 6000liApx 6000 model 1Apx 6000li model 1

Table of Contents