Table of Contents
Advertisement
System board
NOTE:
The system board spare part kit includes replacement thermal material.
All system boards use the following part numbers:
xxxxxx-001: Windows 7 or non-Windows operating systems
xxxxxx-601: Windows 10 operating system
Description
System board equipped with Intel Core M7-6Y75 processor
System board equipped with Intel Core M5-6Y57 processor
System board equipped with 8 GB of system memory and an Intel Core M5-6Y57 processor
System board equipped with 8 GB of system memory and an Intel Core M5-6Y54 processor
Plastics Kit (includes system board clip)
Before removing the system board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
6.
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●
Solid-state drive (see
●
WLAN module (see
●
Heat sink (see
Remove the system board:
1.
Disconnect the following cables:
(1): Display panel
(2): Speaker
(3): Keyboard (backlight)
(4): Wireless antennas
(5): Keyboard (primary)
(6): Webcam
(7): Fingerprint reader
(8): NFC module
(9): ForcePad
48
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page
43).
Solid-state drive on page
WLAN module on page
Heat sink on page
41)
24).
31)
33)
Spare part number
842326-xxx
842328-xxx
842327-xxx
842325-xxx
860705-001
Advertisement
Table of Contents
