HP 240 G6 Maintenance And Service Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Notebook
  5. 240 G6
  6. Maintenance and service manual

HP 240 G6 Maintenance And Service Manual

Pc
Hide thumbs
Table of Contents

Advertisement

Quick Links

HP 240 G6 Notebook PC
Maintenance and Service Guide

Advertisement

Table of Contents
loading

Related Manuals for HP 240 G6

Summary of Contents for HP 240 G6

  • Page 1 HP 240 G6 Notebook PC Maintenance and Service Guide...
  • Page 2 HP Inc. under license. bound by the terms of the HP End User License Not all features are available in all editions of Intel, Celeron, and Pentium are trademarks of Agreement (EULA).
  • Page 3 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
  • Page 4 Safety warning notice...

  • Page 5: Table Of Contents

    Table of contents 1 Product description ............................1 2 Components ..............................5 Right ..................................5 Left ..................................6 Display ..................................8 Keyboard area ................................ 9 TouchPad ............................. 9 Lights ..............................10 Button ..............................11 Special keys ............................12 Action keys ............................13 Bottom .................................
  • Page 6 Recovering using HP Recovery Manager ................... 75 What you need to know before you get started ............. 75 Using the HP Recovery partition (select products only) ..........76 Using HP Recovery media to recover ................76 Changing the computer boot order ................77...
  • Page 7 9 Using HP PC Hardware Diagnostics (UEFI) ....................... 79 Downloading HP PC Hardware Diagnostics (UEFI) to a USB device ..............79 10 Specifications ............................81 Computer specifications ............................81 35.6-cm (14.0-in) display specifications ......................82 Hard drive specifications ............................. 83 DVD±RW SuperMulti DL Drive specifications .......................
  • Page 8 viii...

  • Page 9: Product Description

    Product description Category Description i5 7200 i3 6006U N3060 Product name HP 240 G6 Notebook PC √ √ √ Processor 7th generation Intel® Core™ i5-7200 processor (2.5 GHz, turbo up to 3.1 GHz, √ 2133 MHz/3-MB L3, dual 15W) 7th generation Intel Core i3-6006U processor (2.0 GHz, 2133 MHz/3-MB L3, √...
  • Page 10 Supports configuration without optical drive √ √ √ Camera/ mic HP TrueVision HD camera - activity LED, USB 2.0, HD BSI sensor, f2.0, 720p by √ √ √ 30 frames per second HP Camera – VGA camera, indicator LED, USB 2.0, f2.4, 480p by 30 frames per √...
  • Page 11 Category Description i5 7200 i3 6006U N3060 Ports VGA (Dsub 15 pin) supporting 1920 ×1200 @ 60Hz √ √ √ HDMI version 1.4b supporting 1920×1080 @ 60Hz √ √ √ Hot Plug/unplug and auto detect for correct output to wide-aspect vs. standard √...
  • Page 12 Category Description i5 7200 i3 6006U N3060 Ubuntu Standard √ √ √ Service End-user replaceable parts √ √ √ AC adapter √ √ √ Battery √ √ √ Optical drive √ √ √ Chapter 1 Product description...

  • Page 13: Components

    Components Right Component Description Power light ● On: The computer is on. ● Blinking: The computer is in the Sleep state, a power- saving state. The computer shuts off power to the display and other unneeded components. ● Off: The computer is off or in Hibernation. Hibernation is a power-saving state that uses the least amount of power.

  • Page 14: Left

    Left Component Description Power connector Connects an AC adapter. Battery light When AC power is connected: ● White: The battery charge is greater than 90 percent. ● Amber: The battery charge is from 0 to 90 percent. Off: The battery is not charging. ●...
  • Page 15 Safety, and Environmental Notices. To access this guide: Type support in the taskbar search box, and then select the HP Support Assistant app. ‒ or – Click the question mark icon in the taskbar. Select My PC, select the Specifications tab, and then select User Guides.

  • Page 16: Display

    For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region. To access this guide: Type support in the taskbar search box, and then select the HP Support Assistant app. ‒ or – Click the question mark icon in the taskbar.

  • Page 17: Keyboard Area

    Keyboard area TouchPad Component Description TouchPad zone Reads your finger gestures to move the pointer or activate items on the screen. Left TouchPad button Functions like the left button on an external mouse. Right TouchPad button Functions like the right button on an external mouse. Keyboard area...

  • Page 18: Lights

    Lights Component Description Caps lock light On: Caps lock is on, which switches the key input to all capital letters. Mute light ● Amber: Computer sound is off. Off: Computer sound is on. ● Chapter 2 Components...

  • Page 19: Button

    Button Component Description Power button When the computer is off, press the button to turn on the ● computer. When the computer is on, press the button briefly to initiate ● Sleep. When the computer is in the Sleep state, press the button briefly ●...

  • Page 20: Special Keys

    Special keys Component Description Displays system information when pressed in combination with key. Executes frequently used system functions when pressed in combination with another key. Such key combinations are called hot keys. Windows key Opens the Start menu. NOTE: Pressing the Windows key again will close the Start menu.

  • Page 21: Action Keys

    Action keys An action key performs the function indicated by the icon on the key. To determine which keys are on your product, see Special keys on page ▲ To use an action key, press and hold the key. Icon Description Opens Help and Support, which provides tutorials, information about the Windows operating system and your computer, answers to questions, and updates to your computer.

  • Page 22: Bottom

    Bottom Component Description Battery lock Locks the battery in the battery bay. Battery bay Holds the battery. Battery release latch Releases the battery. Speakers (2) Produce sound. Vent Enables airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating.

  • Page 23: Labels

    Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer. IMPORTANT: Check the following locations for the labels described in this section: the bottom of the computer, inside the battery bay, under the service door, or on the back of the display. ●...
  • Page 24 Chapter 2 Components...

  • Page 25: Illustrated Parts Catalog

    Illustrated parts catalog Computer major components NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Computer major components...
  • Page 26 Item Component Spare part number Display assembly not spared NOTE: For display assembly spare part information, see Display assembly subcomponents on page Top cover/keyboard 929159-xx1 NOTE: For a detailed list of keyboard country codes, see Top cover/keyboard on page TouchPad button board 925365-001 Speakers (includes left and right speakers and cable) 925376-001...
  • Page 27 Item Component Spare part number ● 2 GB 691739-005 DDR4-2400; for use in models with 6th and 7th generation Intel Core processors ● 8-GB 862398-855 4 GB 862397-855 ● ● 2 GB 864271-855 (14) 925352-001 Heat sink assembly (includes replacement thermal materials) (15) For use in models with UMA graphics memory and Intel Core processors 925348-001...

  • Page 28: Display Assembly Subcomponents

    Display assembly subcomponents Item Component Spare part number Display bezel 925335-001 Raw display panel (35.6-cm [14.0-in]) 850886-003 Camera/microphone module 919471-001 919472-001 Hinge cover Right 931551-001 Left 931552-001 Hinge Kit (left and right) 925356-001 Chapter 3 Illustrated parts catalog...

  • Page 29: Mass Storage Devices

    Item Component Spare part number Display cable (includes display panel cable and camera/microphone cable) 925342-001 Antenna 925314-001 Display enclosure: 929156-001 Mass storage devices Item Component Spare part number Hard drive, SATA; does not include brackets, connector board, or cable): 1-TB, 5400-rpm 778192-005 500-GB, 7200-rpm 703267-005...

  • Page 30: Cables

    925346-001 Power button board cable 925345-001 Miscellaneous parts Component Spare part number HP Smart AC adapter (4.5 mm, non-PFC) 65-W, EM, for use in India and the People’s Republic of China 913691-850 45-W 741727-001 Power cord: For use in Argentina...
  • Page 31 Component Spare part number For use in Italy 920688-002 For use in Japan 920688-017 For use in North America 920688-001 For use in the People’s Republic of China 920688-014 For use in South Africa 920688-010 For use in South Korea 920688-013 For use in Switzerland 920688-009...
  • Page 32 Chapter 3 Illustrated parts catalog...

  • Page 33: Removal And Replacement Procedures Preliminary Requirements

    Removal and replacement procedures preliminary requirements Tools required You will need the following tools to complete the removal and replacement procedures: Flat-bladed screwdriver ● ● Magnetic screwdriver Phillips P0 and P1 screwdrivers ● Service considerations The following sections include some of the considerations that you must keep in mind during disassembly and assembly procedures.

  • Page 34: Drive Handling

    Drive handling CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions: Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 35: Packaging And Transporting Guidelines

    Typical electrostatic voltage levels Relative humidity Event Walking across carpet 35,000 V 15,000 V 7,500 V Walking across vinyl floor 12,000 V 5,000 V 3,000 V Motions of bench worker 6,000 V 800 V 400 V Removing DIPS from plastic tube 2,000 V 700 V 400 V...
  • Page 36 Equipment guidelines Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. ● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly against the skin at all times.

  • Page 37: Removal And Replacement Procedures For Customer Self-Repair Parts

    Self-Repair is supported in your location. NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Component replacement procedures...

  • Page 38: Battery

    Battery Description Spare part number 4-cell, 41-Whr, 2.8-Ah Li-ion battery 919701-850 3-cell, 31-Whr, 2.8-Ah Li-ion battery 919700-850 Before disassembling the computer, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 39: Optical Drive

    Optical drive Description Spare part number DVD+/-RW Double-Layer SuperMulti Drive 920417-001 Optical drive bezel 929158-001 Optical drive bracket 925353-001 Before removing the optical drive, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 40 If it is necessary to remove the optical drive bezel, insert a paper clip into the release hole (1) to disengage the bezel. Press the tab (2) to release the bezel from the drive. Rotate the side of the bezel (3), and the remove it (4).

  • Page 41: Removal And Replacement Procedures For Authorized Service Provider Parts

    Accessing these parts can damage the computer or void the warranty. NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Component replacement procedures...
  • Page 42 Remove the display bezel (4). To remove the camera/microphone module: Position the display assembly with the top edge toward you. Pry up to disengage the camera/microphone module from the adhesive that secures it to the display (1). Disconnect the cable (2) from the module. To remove the display panel: Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...
  • Page 43 Remove the four Phillips PM2.0×3.0 screws (1) that secure the display panel to the top of the enclosure. Rotate the display panel onto the keyboard (2) to gain access to the display cable connection on the back of the panel. On the back of the display panel, release the adhesive strip that secures the display panel cable to the display panel, and then disconnect the cable (1).
  • Page 44 Remove the display panel from the computer (2). Reverse this procedure to reassemble and install the display assembly components. Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...

  • Page 45: Bottom Cover

    Bottom cover Description Spare part number Bottom cover for use in models with an optical drive 929157-001 Bottom cover for use in models without an optical drive 931550-001 Before removing the bottom cover, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 46 Use a plastic, non-marking tool (1) to pry the bottom cover from the computer (2). Reverse this procedure to install the bottom cover. Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...

  • Page 47: Wlan Module

    WLAN module Description Spare part number Intel Dual Band Wireless-AC 7265 802.11AC 2x2 WiFi + BT 4.2 Combo Adapter (non-vPro) 901229-855 Realtek RTL8723DE 802.11 bgn 1x1 WiFi + BT 4.2 Combo Adapter 927230-855 Realtek RTL 8188EE 802.11 bgn 1x1 WiFi Adapter 927235-855 Intel Dual Band Wireless-AC 3168 802.11 ac 1x1 WiFi + BT 4.2 Combo Adapter 863934-855...
  • Page 48 Remove the WLAN module by pulling the module away from the slot at an angle (3). NOTE: If the WLAN antennas are not connected to the terminals on the WLAN module, the protective sleeves must be installed on the antenna connectors, as shown in the following illustration. Reverse this procedure to install the WLAN module.

  • Page 49: Memory Module

    Memory module Description Spare part number Memory module (PC3L-1600) For use in models with Intel Pentium and Celeron processors: 8-GB 693374-005 4-GB 691740-005 2-GB 691739-005 Memory module (PC4-2400) For use in models with 6th and 7th generation Intel Core processors: 8-GB 862398-855 4-GB...
  • Page 50 Remove the memory module (2) by pulling it away from the slot at an angle. Reverse this procedure to install a memory module. Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...

  • Page 51: Hard Drive

    Hard drive Three different SKUs related to storage are offered: ● Hard drive only ● M.2 solid-state drive only ● Hard drive and M.2 solid-state drive For hard drive only models, install the hard drive into hard drive bay. For solid-state drive only models, install the solid-state drive into the solid-state drive adapter bracket, and then into the hard drive bay.
  • Page 52 Pull the hard drive assembly away from connector (2), and the remove the hard drive assembly from the computer (3). To remove the hard drive bracket from the hard drive, remove the four Phillips PM3.0×3.0 screws (1) that secure the bracket to the hard drive. Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...
  • Page 53 Remove the hard drive bracket from the hard drive (2). Reverse this procedure to reassemble and install the hard drive. Component replacement procedures...

  • Page 54: Fan

    Description Spare part number 925352-001 NOTE: To properly ventilate the computer, allow at least 7.6 cm (3.0 in) of clearance on the left side of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist.
  • Page 55 Remove the fan from the computer (3). Reverse this procedure to install the fan. Component replacement procedures...

  • Page 56: Touchpad Button Board

    TouchPad button board Description Spare part number TouchPad button board 925365-001 TouchPad button board cable 925344-001 TouchPad cable 925346-001 Before removing the TouchPad button board, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 57: Heat Sink Assembly

    Heat sink assembly NOTE: The heat sink assembly spare part kit includes replacement thermal materials. Description Spare part number Heat sink for use in models with UMA graphics and Intel Pentium or Celeron processors 925347-001 Heat sink for use in models with UMA graphics memory and Intel Core processors 925348-001 NOTE: To properly ventilate the computer, allow at least 7.6 cm (3.0 in) of clearance on the left side of the...
  • Page 58 Figure 6-1 Discrete graphics Discrete graphics Thermal paste is used on the processor and associated heat sink area (1)(2), as ● well as the graphics chip and associated heat sink area (3)(4). Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...
  • Page 59 Figure 6-2 UMA graphics UMA graphics Thermal paste is used on the heat sink (1) and the processor (2). ● Component replacement procedures...
  • Page 60 Figure 6-3 UMA graphics (fanless) UMA graphics (fanless) Thermal paste is used on the heat sink (1) and the processor (2). ● Reverse this procedure to reassemble and install the heat sink assembly. Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...

  • Page 61: Speakers

    Speakers Description Spare part number Speakers (includes left and right speakers and cable) 925376-001 Before removing the speakers, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.
  • Page 62 Lift up and remove the speakers from the computer (4). Reverse this procedure to install the speakers. Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...

  • Page 63: Usb Board

    USB board Description Spare part number USB board for use in models with Intel Pentium or Celeron processors 925363-001 USB board for use in models with Intel Core processors 925364-001 USB board cable 925343-001 Before removing the USB board, follow these steps: Shut down the computer.

  • Page 64: System Board

    System board NOTE: The system board spare part kit includes replacement thermal materials. Description Spare part number System board (includes replacement thermal materials): All system boards use the following part numbers: xxxxxx-001: Non-Windows operating systems xxxxxx-601: Windows 10 operating system Intel Core i5-7200U processor 925422-xx1 Intel Core i3-6006U processor...
  • Page 65 Remove the three Phillips PM2.5×3.5 screws (1) that secure the system board to the computer. Rotate the side of the board upward (2), and then lift the system board out of the computer (3). Reverse this procedure to install the system board. Component replacement procedures...

  • Page 66: Rtc Battery

    RTC battery Description Spare part number RTC battery 746439-001 Before removing the RTC battery, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.

  • Page 67: Display Assembly

    Display assembly This section describes removing the display assembly and disassembling display subcomponents. You must remove the display from the computer to disassemble certain display subcomponents. You can remove the bezel, camera, and raw display panel without removing the display. See Display subcomponents (bezel, panel, camera) on page 33 for more information.
  • Page 68 Separate the display from the computer (3). If it is necessary to replace any of the display assembly subcomponents: To remove the display bezel: Flex the inside of the top edge (1), the left and right edges (2), and the bottom edge (3) of the display bezel until the bezel disengages from the display enclosure.
  • Page 69 To remove the camera/microphone module: Position the display assembly with the top edge toward you. Pry up to disengage the camera/microphone module from the adhesive that secures it to the display (1). Disconnect the cable (2) from the module. To remove the display panel: Remove the four Phillips PM2.0×3.0 screws (1) that secure the display panel to the top of the enclosure.
  • Page 70 Rotate the display panel onto the keyboard (2) to gain access to the display cable connection on the back of the panel. NOTE: The display will not be connected to the computer as shown in the following image. On the back of the display panel, release the adhesive strip that secures the display panel cable to the display panel, and then disconnect the cable (1).
  • Page 71 Remove the display panel from the computer (2). NOTE: The display will not be connected to the computer as shown in the following image. To remove the display hinges: Pull either side of each hinge cap to disengage it from the enclosure (1). Component replacement procedures...
  • Page 72 Remove the caps from the hinges (2). Remove the two Phillips PM2.0×3.0 screws (1), and then lift the top display hinge (2) off the display. Remove the three broadhead Phillips PM2.5×3.0 screws (1) and the PM2.0×3.0 screw (2) that secure each hinge to the display enclosure. Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...
  • Page 73 Remove the display hinges (3). To remove the wireless antennas an cables, release the cables from the clips built into the side of the display enclosure (1), and then remove the antennas and cables (2)(3). Component replacement procedures...
  • Page 74 To remove the display/camera cable, remove the cable from the clips built into the side of the display enclosure (1), and then remove the cable from the display enclosure (2). Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...
  • Page 75 Use the following image to determine proper cable routing around the hinges. If replacing the display enclosure, be sure that the subcomponents (including the camera/microphone module, the antenna receivers, and all associated cables and hardware) are transferred to the new enclosure.

  • Page 76: Power Connector Cable

    Power connector cable Description Spare part number Power connector cable 814142-013 Before removing the power connector cable, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.

  • Page 77: Power Button Board

    Power button board Description Spare part number Power button board 925366-001 Power button board cable 925345-001 Before removing the power button board, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 78: Top Cover/Keyboard

    Top cover/keyboard The top cover/keyboard spare part remains after all other spare parts have been removed. The top cover/keyboard spare part kit includes the keyboard and keyboard cable. In this section, the first table provides the main spare part number for the top cover/keyboard. The second table provides the country codes.

  • Page 79: Using Setup Utility (Bios)

    To reveal the BIOS version information (also known as ROM date and System BIOS), use one of these options. ● HP Support Assistant Type support in the taskbar search box, and then select the HP Support Assistant app. – or – Click the question mark icon in the taskbar.

  • Page 80: Downloading A Bios Update

    If your computer is connected to a network, consult the network administrator before installing any software updates, especially system BIOS updates. Type support in the taskbar search box, and then select the HP Support Assistant app. – or – Click the question mark icon in the taskbar.

  • Page 81: Backing Up, Restoring, And Recovering

    Use HP Recovery Manager to create HP Recovery media after you successfully set up the computer. This step creates a backup of the HP Recovery partition on the computer. The backup can be used to reinstall the original operating system in cases where the hard drive is corrupted or has been replaced. For...

  • Page 82: Using Windows Tools

    HP Recovery media can also be used to customize the system or restore the factory image if you replace the hard drive.

  • Page 83: Restore And Recovery

    Creating HP Recovery media (select products only) on page If your computer does not allow the creation of HP Recovery media or if the HP Recovery media does not ● work, you can obtain recovery media for your system from support. See the Worldwide Telephone Numbers booklet included with the computer.

  • Page 84: Using The Hp Recovery Partition (Select Products Only)

    Using HP Recovery media to recover You can use HP Recovery media to recover the original system. This method can be used if your system does not have an HP Recovery partition or if the hard drive is not working properly.

  • Page 85: Changing The Computer Boot Order

    Changing the computer boot order If your computer does not restart in HP Recovery Manager, you can change the computer boot order, which is the order of devices listed in BIOS where the computer looks for startup information. You can change the selection to an optical drive or a USB flash drive.

  • Page 86: Removing The Hp Recovery Partition (Select Products Only)

    Removing the HP Recovery partition (select products only) HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space. IMPORTANT: After you remove the HP Recovery partition, you will not be able to perform System Recovery or create HP Recovery media from the HP Recovery partition.

  • Page 87: Using Hp Pc Hardware Diagnostics (Uefi)

    Using HP PC Hardware Diagnostics (UEFI) HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside the operating system so that it can isolate hardware failures from issues that are caused by the operating system or other software components.
  • Page 88 Additional BIOS crisis recovery tool HP provides a BIOS crisis recovery tool through the HP PC Hardware Diagnostics 3-in-1 USB key. This tool can be used by HP authorized service providers to recover systems that have failed due to a corrupted BIOS. For more information about using the 3-in-1 USB key for BIOS crisis recovery, go to http://www.hp.com/go/...

  • Page 89: 10 Specifications

    10 Specifications Computer specifications Metric U.S. Dimensions Depth 240.0 mm 9.45 in Width 340.0 mm 13.39 in Height 23.7 mm 0.93 in Weight 1853 g 4.09 lb 3 cell battery 1900 g 4.19 lb 4 cell battery Input power Operating voltage and current 19.5 V dc @ 3.33 A –...

  • Page 90: 35.6-Cm (14.0-In) Display Specifications

    35.6-cm (14.0-in) display specifications Metric U.S. Active diagonal size 35.6-cm 14.0-in Resolution 1366x768 (HD) Surface treatment Anti glare Brightness 220 nits Viewing angle Backlight WLED Graphics adapter Thickness 3.0 mm Chapter 10 Specifications...

  • Page 91: Hard Drive Specifications

    Hard drive specifications 1-TB* 500-GB* Dimensions Height 7.0 mm or 9.5 mm 7.0 mm Length 100.4 mm 100.6 mm Width 69.9 mm 70.1 mm Weight 107.0 g 92.0 g Interface type SATA SATA Transfer rate Synchronous (maximum) 300 MB/sec 300 MB/sec Security ATA security ATA security...

  • Page 92: Dvd±Rw Supermulti Dl Drive Specifications

    DVD±RW SuperMulti DL Drive specifications Component Value Applicable disc Read: Write: CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD- CD-R and CD-RW ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (Photo- DVD+R, DVD+RW, DVD-R, DVD-RW, CD, Video CD), Multisession CD (Photo-CD, CD- DVD-RAM EXTRA, Portfolio, CD-R, CD-RW), CD-R, CD-RW, DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18), DVD-...

  • Page 93: 11 Statement Of Memory Volatility

    Intel-based and AMD-based system boards contain nonvolatile memory subcomponents as originally shipped from HP, assuming that no subsequent modifications have been made to the system and assuming that no applications, features, or functionality have been added to or installed on the system.
  • Page 94 If a DriveLock password is set, select the Security menu, and scroll down to Hard Drive Utilities under the Utilities menu. Select Hard Drive Utilities, select DriveLock, then uncheck the checkbox for DriveLock password on restart. Select OK to proceed. Select the Main menu, and then select Reset BIOS Security to factory default.

  • Page 95: Nonvolatile Memory Usage

    HP Sure Start only) backup of The content is managed Embedded Controller. critical System solely by the HP Sure Start BIOS code, EC Embedded Controller. firmware, and critical computer configuration data for select...
  • Page 96 512 KByte flash Stores Fingerprint reader memory is Only a digitally signed (select products fingerprint programmed by user application can make the only) templates. enrollment in HP call to write to the flash. ProtectTools Security Manager. Chapter 11 Statement of memory volatility...

  • Page 97: Questions And Answers

    HP has provided options in Computer Setup (BIOS) to allow you to run in legacy BIOS, if required by the operating system. Examples of this requirement would be if you upgrade or downgrade the OS.

  • Page 98: Using Hp Sure Start (Select Models Only)

    BIOS to its previously safe state, without user intervention. Those select computer models ship with HP Sure Start configured and enabled. HP Sure Start is configured and already enabled so that most users can use the HP Sure Start default configuration. The default configuration can be customized by advanced users.

  • Page 99: 12 Power Cord Set Requirements

    12 Power cord set requirements The wide-range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts ac, or from 220 to 240 volts ac. The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the equipment is purchased.

  • Page 100: Requirements For Specific Countries And Regions

    Requirements for specific countries and regions Country/region Accredited agency Applicable note number Argentina IRAM Australia Austria Belgium CEBEC Brazil ABNT Canada Chile Denmark DEMKO Finland FIMKO France Germany India Israel Italy Japan The Netherlands KEMA New Zealand SANZ Norway NEMKO The People's Republic of China Saudi Arabia SASO...
  • Page 101 Country/region Accredited agency Applicable note number The appliance coupler, flexible cord, and wall plug must bear a “T” mark and registration number in accordance with the Japanese Dentori Law. The flexible cord must be Type VCTF, 3-conductor, 0.75mm or 1.25mm conductor size.
  • Page 102 Chapter 12 Power cord set requirements...

  • Page 103: 13 Recycling

    Follow the local laws and regulations in your area for battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, see the HP Web site at http://www.hp.com/recycle.
  • Page 104 Chapter 13 Recycling...

  • Page 105: Index

    Index camera light, identifying 8 display subcomponents action keys camera, identifying 8 removal 33 using 13 camera/microphone cable spare part numbers 33 airplane mode key 13 illustrated 21 drive light 5 antenna removing 34, 61, 63 DVD±RW SuperMulti DL Drive illustrated 21 camera/microphone module specifications 84...
  • Page 106 6 illustrated 20 caps lock 10 HDMI 6 removing 34, 61, 63 drive 5 product description 3 HP PC Hardware Diagnostics (UEFI) power 5 USB 2.0 5 using 79 RJ-45 (network) 6 USB 3.x SuperSpeed 6 HP Recovery Manager...
  • Page 107 75 system board removing 65, 66 USB flash drive 76 removing 56 wireless certification label 15 using HP Recovery media 74 spare part number 18, 56 wireless, product description 2 recovery media system memory, removing personal WLAN antennas, identifying 8...
  • Page 108 100 Index...

Table of Contents