Table of Contents
Advertisement
Solid-state drive
Description
Solid-state drive, M.2
512-GB, MLC
256-GB, SED, OPAL2
256-GB, TLC
256-GB, PCIe, NVMe, MLC
240-GB, MLC
180-GB, MLC
180-GB, SED, OPAL2
128-GB, TLC
Before removing the solid-state drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover on page
24).
Spare part number
842300-001
842298-001
842610-001
842299-001
842611-001
842296-001
842297-001
842295-001
Component replacement procedures
31
Advertisement
Table of Contents
