Need More Help - BenQ PD Series User Manual

Sensors
The light sensor of the monitor does not work well.
The light sensor is located at the front bottom of the monitor. Please check:
• If you have removed the sensor protection sticker.
• If the
Bright Intelligence
• If there are any obstacles in front of the sensor that keep the sensor from detecting the light
properly.
• If there are any objects or clothing in bright colors in front of the sensor. Bright colors
(especially white and fluorescent colors) reflect light and the sensor cannot detect the main
light sources.
The ECO sensor of the monitor does not work well.
• The ECO sensor is located at the front bottom of the
monitor. Check if there are any obstacles in front of the sensor
that keep the sensor from detecting your presence properly.
• If you have removed the sensor protection sticker.
• The colors and the materials of your clothes may affect the
detection. Adjust the sensor range if needed. See
Range on page 46 for more information.
• Adjust the distance between you and the monitor.
If none of the proceeding actions works, it is probably because
the materials of your clothes are unique and cannot be detected by the ECO sensor. Please be
noted that this is neither a manufacturing detect nor is the sensor damaged. You should turn
off the ECO sensor for now in

Need more help?

If your problems remain after checking this manual, please contact your place of purchase or
visit the local website from
function is set to
ON
>
Eco ECO Sensor
www.BenQ.com for more support and local customer service.
. Check
Ergonomics
Sensor
.
>
Bright Intelligence
Troubleshooting
.
49