BenQ PD Series User Manual page 42

Item
Custom Key
1
Custom Key
2
Custom Key
3
DDC/CI
DP Auto
Switch
HDMI Auto
Switch
Auto Power
Off
Resolution
Notice
42 Navigating the main menu
Sets the function to be accessed by custom key 1.
Sets the function to be accessed by custom key 2.
Sets the function to be accessed by custom key 3.
Allows the monitor settings to be set through the software
on the PC.
DDC/CI, short for Display Data Channel/Command Interface,
which was developed by Video Electronics Standards Association
(VESA). DDC/CI capability allows monitor controls to be sent via
the software for remote diagnostics.
When this function is activated, DP port will be in the
input auto select loop. Otherwise, DP can only be selected
by input select or by hot key.
When this function is activated, HDMI port will be in the
input auto select loop. Otherwise, HDMI can only be
selected by input select or by hot key.
Sets the time to power off the monitor automatically in
power saving mode.
Sets whether to display the resolution notice of the
recommended resolution when a new input source is
detected by the monitor.
Function Range
•
Picture Mode
•
Input
• DisplayPort
•
Mini
DisplayPort
•
HDMI
•
Rec. 709
•
sRGB
•
CAD / CAM
•
Animation
•
Low Blue Light
•
Darkroom
•
Brightness
•
Contrast
•
Volume
•
Mute
•
ON
•
OFF
•
ON
•
OFF
•
ON
•
OFF
•
OFF
•
10min.
•
20min.
•
30min.
•
ON
•
OFF