Arc Jack; 24" Or 32" Model - Insignia ROKU TV NS-24ER310NA17 User Manual

ARC jack

Your TV can send sound to an ARC device, like an AV receiver, to create a home theater that uses two or more speakers.
When you connect external speakers or a sound bar, sound plays through your TV speakers and the external speakers or
sound bar.

24" or 32" model

Note
If your TV is the 48" model, go to
Note
Images do not necessarily represent the exact design of your television.
On your TV
HDMI® cable
connector
HDMI1 (ARC)
jack
1 Make sure that your TV's power cord is unplugged and the digital speaker system or sound bar is turned off.
2 Connect an HDMI® cable (not provided) to the HDMI1 (ARC) jack on the back of your TV and to the HDMI IN jack on
the digital speaker system or sound bar.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or sound bar.
5 To turn off your TV speakers, on the Home menu, press
Audio, then press OK. Highlight TV speakers, then press OK. Press OK to remove the check from the TV speakers
enabled check box.
6 To configure the HDMI1 (ARC) jack to output sound to an ARC device, on the Home menu, press
Settings, then press OK. Highlight System, then press OK. Highlight Control other devices (CEC), then press OK.
Highlight HDMI ARC, then press OK to check the box.
48" model
ARC audio device
Sound bar
HDMI® cable
www.insigniaproducts.com
24"/32" 720p, 48" 1080p, 60Hz, LED Roku TV
on page 52.
or to highlight Settings, then press OK. Highlight
Back of TV
or to highlight
51