Earthing Installation - Morphy Richards MM820CXN-PM0F Installation & User's Instructions

Table of Contents

Advertisement

Installation

EARTHING INSTALLATION

DANGER
Electric Shock Hazard
Touching some of the internal components
can cause serious personal injury or death.
Do not disassemble this appliance.
WARNING
Electric Shock Hazard
Improper earthing can result in electric shock.
Do not plug into an outlet until appliance is
properly installed and earthed.
Three pin earthed plug Properly polarised and earthed outlet.
This appliance must be earthed. In the event of an electrical
short circuit,grounding reduces the risk of electric shock by
providing an escape wire for the electric current. This appliance
is equipped with a cord having a grounding wire with a earthing
plug. The plug must be plugged into an outlet
that is properly installed and earthed.
Consult a qualified electrician or serviceman if the earthing
instructions are not completely understood or if doubt exists
as to whether the appliance is properly earthed. If it is
necessary to use an extension cord, use only a 3-wire
extension cord that has a 3 pin earthing plug, and a 3-slot
socket which will
accept the plug.
1. A short power-supply cord is provided to reduce the risks
resulting from becoming entangled in or tripping over a longer cord.
2. If an extension cord is used:
a. The marked electrical rating of the extension cord should be
at least as great as the electrical rating of the appliance.
b. The extension cord must be earthed, a 3-wire cord.
c. The extension cord should be arranged so that it will not
drape over the worktop or tabletop where it can be pulled on
by children or tripped over accidentally.
Check that the voltage marked on the product corresponds
with your supply voltage.
This product is fitted with a 13 A plug complying with BS1363.
lf this plug is unsuitable or needs to be replaced, please note
the following:
Important: The wires in the mains lead are coloured in
accordance with the following code:
GREEN / YELLOW – EARTH,
BLUE – NEUTRAL, BROWN – LIVE
For UK use only
Plug fitting details (where applicable):
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured markings
identifying the terminals in your plug proceed as follows:
The GREEN/YELLOW wire is the EARTH and must be
connected to the terminal which is marked with the letter
(E) or by the earth symbol or coloured GREEN or
GREEN/YELLOW.
The BLUE wire is the NEUTRAL and must be connected to
the terminal marked with the letter (N) or coloured BLACK.
The BROWN wire is the LIVE and must be connected to
the terminal marked with the letter(L) or coloured RED.
Always ensure that the plug cord grip is fastened correctly.
If a 13A (BS 1363) fused plug is used it must be fitted with
a 13A fuse conforming to BS1362 and be ASTA approved.
If in doubt contact a qualified electrician.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents