Installation; Please Note Electrical Connection - Morphy Richards MM820CXN-PM0F Installation & User's Instructions

Table of Contents

Advertisement

Installation

Please Note
Electrical connection
The oven is fitted with a plug and
must be only connected to a
properly installed earthed socket.
In accordance with the appropriate
regulations,
the socket must only
be installed and the connecting
cable must only be replaced by a
qualified electrician.
no longer accessible following
installation and all-pole isolating
switch must
be present on the
installation side with a contact gap
of at least 3mm.
.
Select a level surface that provide
1
enough open space for the intake
and/or outlet vents.
The rear surface of appliance shall be
placed against a wall.
One side must be open.
(1) Leave a minimum clearance of 12
inches (30cm) above the oven.
(2) Do not remove the legs from the
bottom of the oven.
(3) Blocking the intake and/or outlet openings
can damage the oven.
(4) Place the oven as far away from
radios and TV as possible.
Operation of microwave oven may
cause interference to your radio or TV
reception.
2. Plug your oven into a standard household
outlet. Be sure the voltage and the
frequency is the same as the voltage
and the frequency on the rating label.
WARNING: Do not install oven over a
range cooktop or other heat-producing
appliance. If installed near or over a heat
source, the oven could be damaged and
the warranty would be void.
If the plug is
10
12 inch(30cm)
OPEN
3.0 inch(7.5cm)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents