Power Button Board - HP ProBook 11 G2 Education Edition Maintenance And Service Manual

8. Remove the keyboard/top cover (3).
Reverse this procedure to install the keyboard/top cover.

Power button board

Description
Power button board
NOTE: The power button board spare part kit does not include the power button board cable. The
power button board cable is included in the Cable Kit, spare part number 846982-001.
Before removing the power button board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Bottom cover (see
b. Hard drive (see
c. Keyboard/top cover (see
Remove the power button board:
Battery on page 24), and then remove the following components:
Bottom cover on page
Hard drive on page 28)
Keyboard/top cover on page
26)
47)
Component replacement procedures
Spare part number
809865-001
51