Table of Contents
Advertisement
2.2
Installation
To Mount on Concrete or Mortar Walls:
1
Place the template (included) on the wall to mark the 3 screw positions.
2
Drill 3 holes and drive the anchor plugs (included) with a hammer, flush to the
wall.
3
Install the 3 screws into the anchor plug.
4
Hook the unit on the screw heads.
2-10
Installation
To the wall surface
Anchor Plug
29 mm
(1 1/8 inch)
Drive the screw
to this position.
Concrete Wall
6.4 mm
(1/4 inch)
Advertisement
Table of Contents
