Table of Contents
Advertisement
1.8
System Diagnosis
— ELOG
You can get the error log of devices such as CPU card, Port card and hard disk
drive.
— SAVE
You can back up voice prompts and all system programming data to a floppy disk
on a data terminal.
— LOAD
You can restore the saved data to the VPS in the event of a hard disk drive failure.
— GPRN
You can display System Programming parameters.
— VERS
You can display the version of hard disk, main ROM and Port card.
— CREP
You can display the programming of Custom service.
— CCLR
You can clear the access count of each Custom service.
— MWL
You can specify the message waiting lamp retry times.
— MRL
You can set the minimum recording length of one message.
— MPLT
You can display the User Prompts recording status.
— HELP
You can display the available Utility Commands.
— QSET
You can start the Quick Setup.
1-18
Overview
Advertisement
Table of Contents
