Table of Contents
Advertisement
1. Placing Originals
Placing regular size originals
When placing regular size originals on the exposure glass or in the ADF, select the size of the originals
from the regular sizes shown on the display.
1.
Select the paper tray using the [ ] or [ ] key, and then press the [ ] key.
2.
Select [Regular Size] using the [ ] or [ ] key, and then press the [OK] key.
• When [Auto Detect] is selected, the size of the placed original will be detected automatically.
3.
Select the paper size using the scroll keys, and then press the [OK] key.
The "Programmed" message appears.
When the regular size originals settings are registered,
display.
• To cancel the size you have set, press the [Reset] key.
36
appears on the top of copy
Hide quick links:
Advertisement
Table of Contents
