No.
Part name
Heat exchanger
10
(Evaporator)
Procedures
1) Follow the procedure in item 3 and 4 .
2) Remove 2 fixing screws at the left side of the
heat exchanger.
3) Remove 3 fixing screws at the upper and
right side of the heat exchanger.
4) Remove the pipe holder from the rear side of
the main unit.
5) Pull out the heat exchanger.
Screws
<To re-installation>
- Please keep assembly heat exchanger follow
figure as below :
Screw
Motor cover
Heat exchanger
- Please make sure that the screw must be fix
heat exchanger and motor cover
Pipe holder
Heat exchanger
- 111 -
FILE NO. SVM-17046
Remarks
Heat exchanger
Screw
Motor cover
Screws