Setting Cursor Display - JRC JFE-680 Instruction Manual

Setting Cursor Display

◎The cursor display method in a standard mode and a history mode is selected.
・Make CURSOR a yellow display, press
Set content
OFF
ON
AUTO
・ Select the method by
4. Operation 20
： OFF/ON/AUTO
： When the cursor key is operated, it makes an error of the cursor without displaying it.
： Whenever the cursor key is operated, the cursor is displayed.
： When the cursor key is operated, the cursor is displayed for 30 seconds. It doesn't
display afterwards. When the cursor key is pressed again, it is displayed at the
position.
and press the [ENT] key.
or the [ENT] key, and select it from the following, set content.