Each Alert And Alert Display (Screen Display) List - JRC JFE-680 Instruction Manual

◎Each Alert and Alert Display (Screen Display) list

Alert Display
No.
(Screen Display)
DEPTH1
01
02 DEPTH2
DEPTH1
03
DEPTH2
04
05 TX1(LEVEL)
RX1(LEVEL)
06
07 RX1(BUBBLE)
TX2(LEVEL)
08
RX2(LEVEL)
09
10 RX2(BUBBLE)
PRINT* 1
11
PRINT(DATA)
12
* 1 Alerts of No. 11 and No. 12 occur only when "build-in, NKG-91, NKG-901" is selected.
This alert No. is also used in Alert Log function. (Refer to page 48)
The Alert Icons are as follows.
Active –unacknowledged alarm
Active –silenced alarm
Active –acknowledged alarm
Rectified –unacknowledged alarm
Active –unacknowledged warning
Active –silenced warning
Active –acknowledged warning
Rectified –unacknowledged warning
Alert
Primary depth alert
Secondary depth alert
Primary sea bottom lost
Secondary sea bottom lost
Primary transmission abnormality
Primary receiving abnormality
Primary bubbling
Secondary transmission abnormality
Secondary receiving abnormality
Secondary bubbling
No thermal
* 1
Printer communication
Primary
Alarm
Alarm
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
paper* 1 Warning
Warning
abnormality* 1
Description
Depth becomes below
the set value
Depth becomes below
the set value
Sea bottom tracking is
unavailable
Sea bottom tracking is
unavailable
Transmission level is low
Receiving level is low
Depth is temporally lost
Transmission level is low
Receiving level is low
Depth is temporally lost
Printer paper is ended
Printer data
communication error
4. Operation 25