Sharp MX-C300P Operation Manual page 99

PCL Settings
Item
Symbol Set
Font
Line Feed Code
PostScript settings
Item
Print PS Errors
Selections Description
Select one of 35 This specifies which country's characters (PCL symbol set) are
sets. assigned to certain of the symbols in the character code list.
The factory default setting is [PC-8].
Select one internal This specifies which PCL font to use for printing. One font can be
font. specified from among the internal fonts. The factory default setting is
[0: Courier].
CR=CR; LF=LF; This specifies the line break code by means of a combination of the
FF=FF, "CR" (return) code, "LF" (line break) code, and "FF" (page break)
CR=CR+LF; LF=LF; code. The factory default setting is printing based on the transmitted
FF=FF, code. The setting can be changed by selecting one of four
CR=CR; combinations.
LF=CR+LF;
FF=CR+FF,
CR=CR+LF;
LF=CR+LF;
FF=CR+FF
Settings
Enable, Disable
WEB FUNCTIONS IN THE MACHINE
Description
When this setting is enabled, an error description is printed
each time a PostScript error occurs.
99