Vivotek VC8101 User Manual page 74

VIVOTEK
Port
HTTPS port: By default, the HTTPS port is set to 443. It can also be assigned to another port number
between 1025 and 65535.
FTP port: The FTP server allows the user to save recorded video clips. You can utilize VIVOTEK's
Installation Wizard 2 to upgrade the firmware via FTP server. By default, the FTP port is set to 21, or
assigned to another port number between 1025 and 65535.
Two way audio port: By default, the two way audio port is set to 5060. Also, it can also be assigned to
another port number between 1025 and 65535.
The Network Camera supports two way audio communication so that operators can transmit and receive
audio simultaneously. By using the Network Camera's built-in or external microphone and an external
speaker, you can communicate with people around the Network Camera.
Note that as JPEG only transmits a series of JPEG images to the client, to enable the two-way audio
function, make sure the video mode is set to "H.264" on the Media > Video > Stream settings page and
the media option is set to "Media > Video > Stream settings" on the Client Settings page. Please refer to
Client Settings on page 36 and Stream settings on page 59.
Audio transmitted to operators
America
Taiwan
Audio transmitted from operators
74 - User's Manual