Vivotek VC8101 User Manual page 57

■ WDR:
Enable WDR Pro: This refers to the Wide Dynamic Range function that enables the camera to capture
details in a high contrast environment. Use the checkbox to enable the function, and use the slide bar
to select the strength of the WDR Pro functionality, depending on the lighting condition at the installation
site. You can select a higher effect when the contrast is high (between the shaded area and the light
behind the objects).
Enable WDR enhanced: This function allows users to identify more image details with an extreme
contrast from an object of interest with one shadowed side against a bright background, e.g., an entrance.
You may select the Enable WDR enhanced checkbox, and then adjust the strength (low, medium, high)
to reach the best image quality.
You can click Restore to recall the original settings without incorporating the changes. When completed
with the settings on this page, click Save to enable the settings.
If you want to configure another sensor setting for a specific lighting condition for a specific period of time
in a day, please click Profile mode to open the Profile of exposure settings page as shown below.
Enable to apply these settings at: Manually enter a range of time for this profile to take effect, and then
check Save to take effect.
Please follow the steps below to configure a profile:
1. Select the Profile mode tab.
2. Select the applicable mode: Please manually enter
a range of time if you choose the Schedule mode.
3. Configure Exposure control settings in the folowing
columns. Please refer to previous dicussions for
detailed information.
4. Click Save to enable the setting and click Close to
exit the page.
VIVOTEK
User's Manual - 57