Table of Contents
Advertisement
Video Stream: This Network Camera supports multiple streams (stream #1 ~ #4) simultaneously. You
can select any one of them for live viewing. For more information about multiple streams, please refer to
page 59 for detailed information.
Manual Trigger: Click to manually enable or disable an event trigger. Please configure an event setting
before enabling this function. A total of 3 or 4 event settings can be configured. For more information
about event setting, please refer to page 103. If you want to hide this item on the homepage, please go
to the System > Homepage Layout > General settings > Customized button to deselect the "show
manual trigger button" checkbox.
Digital Output: Click to turn the digital output device on or off.
PTZ Control Panel:
Start to Auto Pan
Pan: Click this button to start the auto pan (360° continuous rotation).
Stop: Click this button to stop the Auto Pano and Auto Rotate functions.
Patrol: Once the Administrator has determined the list of preset positions (including the zoom-in action
on a particular position), click this button to command the camera to patrol among those positions on
the Patrol List. The Network Camera will patrol continuously. For more information, please refer to PTZ
control on page 100.
Pan /Tilt /Zoom speed: Adjust the speed of these controls when exerted:
Pan speed
-5
-4
-3
-2
-1
0
1
2
3
4
5
Configuration Area
Client Settings: Click this button to access the client setting page. For more information, please refer to
Client Settings on page 36.
Configuration: Click this button to access more of the configuration options provided with the Network
Camera. It is suggested that a password is applied to the Network Camera so that only the administrator
Left
Down
Zoom Out
Stop Auto Pan or Patrol
Tilt speed
Zoom speed
-5
-5
-4
-4
-3
-3
-2
-2
-1
-1
0
0
1
1
2
2
3
3
4
4
5
5
Up
Return to Home Position
Right
Zoom In
Patrol
Slower
Faster
VIVOTEK
User's Manual - 31
Advertisement
Table of Contents
