Table of Contents
Advertisement
Securing the TV
Insert the pole into the TV, and then fasten securely
with the assembly screws
•
Tighten the four assembly screws loosely at first,
then tighten them firmly to fix securely.
•
Carry out the work on a horizontal and level surface.
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking
the TV.
1
Remove the assembly screws
2
Pull out the pedestal from the TV.
3
Remove the assembly screw
4
Pull out the cover.
5
Remove the assembly screws
Adjust the panel to your desired angle
•
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full
rotation range.
•
Do not place any objects or hands within the full rotation range.
Preventing the TV from falling over
This TV could fall over if it is pushed, pulled or knocked down.
We therefore recommend the TV is secured to the furniture as illustrated.
•
This measure is designed to reduce the risk of injury from a falling TV. However, it cannot guarantee
protection in all cases.
Fall-prevention parts
Band
Wood screw
8
.
from the TV.
from the cover.
from the pole.
10°
10°
(View from above)
Screw
B
E
(View from the bottom)
Securing to a furniture
Fix pedestal and furniture together with band.
Wood screw
Band
•
This image is for illustrative purposes only.
Arrow mark
Hole for
pedestal
installation
Screw
Advertisement
Table of Contents
