Table of Contents
Advertisement
Eco Navigation
Recording Setup
Child Lock
Favourites Edit
Channel List
Auto Tuning
Manual Tuning
Update Channel List
New Channel
Message
• Off
• On
Signal Condition
Add TV Signal
Teletext
Input Labels
Banner Display
Timeout
• 0 (No display)
• 1 / 2 / 3 / 4 / 5 /
6 / 7 / 8 / 9 /
10 seconds
VIERA Connect
Banner
• Off
• On
Playing Time
Display
• Off
• On
VIERA Link
• Off
• On
HDMI Content Type
• Off
• Auto
Power on Link
• Off
• On
Power off Link
• Off
• On
Automatically sets the TV to the most suitable energy-saving mode
•
If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],
[Power Save]
[On]
[Intelligent Auto Standby]
[Auto Standby]
[2 hours]
Formats the connected USB HDD / insert SD card and sets the condition
(p. 54 - 56)
Locks a channel / AV input to prevent access to it (p. 50)
Creates a list of favourite channels (Digital TV mode) (p. 44)
Skips the unwanted channels or edits channels (p. 44, 46)
Sets all Digital TV or Analogue TV channels automatically (p. 45, 46)
Sets the TV channels manually (p. 45, 46)
Updates the channel list while keeping your settings (Digital TV mode) (p. 45)
Selects whether to give a notification message when a new channel is
found (Digital TV mode) (p. 45)
Checks the Digital TV signal condition (Digital TV mode) (p. 45)
Adds the TV mode
•
This function is available if you skip any modes to tune in [Auto Tuning]
for first using the TV.
•
To operate, refer to the [Auto Tuning] operations for first using the TV (p. 13).
The item is not used for this model.
Labels or skips each input terminal (p. 51)
Sets how long the information banner stays on screen (p. 19)
Sets the VIERA Connect introduction banner display (p. 17)
Sets to [On] to display a continuous record of time spent using Game
mode every 30 minutes
•
This function is available when [Game] is selected in [Viewing Mode]
(p. 35).
Sets to use VIERA Link functions
•
VIERA Link functions become available when [VIERA Link] is set to [On]
(p. 81).
Adjusts the picture settings according to the content type from the
connected equipment via HDMI cable
•
This function is available if the connected equipment supports HDMI
Content Type.
•
The content type information will be displayed for several seconds when
this function works.
Sets to use Power on Link functions (p. 82)
Sets to use Power off Link functions (p. 82)
[On (No reminder)]
41
Advertisement
Table of Contents
