Table of Contents
Advertisement
Item
Timer Programming
Off Timer
• Off
• 15 / 30 / 45 / 60 / 75 /
90 minutes
Auto Standby
• Off
• 2 / 4 hours
Item
Input Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
• H & V
• SOG
Reset PC Settings
H-pos
V-pos
Reset DVI
Position
Settings
40
Timer
Adjustments / Configurations (alternatives)
Sets a timer to remind watching or record forthcoming programmes (p. 47)
•
Digital TV mode only
Sets the time until the TV automatically goes into Standby mode
Sets the time the TV automatically goes into Standby mode when no
operation is performed for the selected times
•
Automatic input switching with the connected equipment affects this
function and time-count will be reset.
•
The notification message will appear 3 minutes before going into Standby mode.
Setup
Adjustments / Configurations (alternatives)
Switches to a wide view
•
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
•
Options change depending on signals
Sets to the minimum level if noise occurs.
Eliminates flicker and distortion
•
Adjust after Clock adjustment
•
Set to the minimum level if noise occurs
PC sync signal type
[H & V]: by the horizontal and vertical signals from your PC
[SOG]: Sync on Green sync from your PC
Press the OK button to reset the PC Setup settings to the default
Adjusts horizontal position settings of DVI
Adjusts vertical position settings of DVI
Press the OK button to reset the DVI Position Settings to the default.
Adjusts horizontal position
Adjusts vertical position
Advertisement
Table of Contents
