3D Eyewear
Lens type
Usage temperature range
Charging power supply
Battery
Viewing range*
2
Materials
Width
Dimensions
Height
(not including
Overall
nose pad part)
length
Mass
*
Operation time/charging time
1
•
The battery deteriorates after repeated use, and the operation time eventually becomes short. The
figures above are at shipping from the factory, and are not a guarantee of performance.
*
Viewing range
2
•
The location of the 3D Eyewear transmitter differs depending on the model of television.
•
There are differences in the viewing range of the 3D Eyewear among individuals.
•
The 3D Eyewear may not operate correctly at the outside of the viewing range.
Wireless LAN Adaptor
Power supply
Antenna
Interface
Standard Compliance
Transmission system
Frequency Range
Transfer rate (standard) *
Access Mode
Security
Dimensions (W × H × D)
Mass
* Transfer rates are theoretical values; however, actual communication rate will vary according to
communication environment or connected equipment.
Note
•
Design and Specifications are subject to change without notice. Mass and Dimensions shown are
approximate.
Liquid Crystal Shutter
0 °C - 40 °C
DC 5 V (supplied by USB terminal of a Panasonic TV)
Lithium-ion polymer rechargeable battery
DC 3.7 V, 70 mAh
Operation time*
: Approx. 30 hours
1
Charging time*
1
: Approx. 2 hours
Transmitter for 3D Eyewear
Within 3.2 m from front surface
(Within ± 35° horizontal, ± 20° vertical)
Main body: Resin
Lens section: Liquid crystal glass
170.1 mm
41.2 mm
169.8 mm
Approx. 38 Net
DC 5V (USB powered) 500mA
T × 1, R × 2
USB 2.0
IEEE802.11n / IEEE802.11a / IEEE802.11g / IEEE802.11b
MISO-OFDM system, OFDM system, DSSS system
IEEE802.11n / IEEE802.11a: 5.150 GHz - 5.850 GHz
IEEE802.11g / IEEE802.11b / IEEE802.11n: 2.400 GHz - 2.4835 GHz
IEEE802.11n: Tx Max. 150Mbps, Rx Max. 300Mbps
IEEE802.11g / IEEE802.11a: Max. 54Mbps
IEEE802.11b: Max. 11Mbps
Infrastructure mode
WPA2-PSK (TKIP/AES)
WPA-PSK (TKIP/AES)
WEP (64bit/128bit)
30.00 mm × 10.72 mm × 94.85 mm
25 Net
101