Panasonic VIERA TH-P50VT30A Operating Instructions Manual page 40

Plasma television
Hide thumbs Also See for VIERA TH-P50VT30A:
Table of Contents

Advertisement

Auto Gain Control
• Off
• On
Volume Correction
Speaker Distance to
Wall
• Over 30cm
• Up to 30cm
MPX
• Stereo
• Mono
• M1
• M2
Digital Audio Preference
• Dolby D
• MPEG
SPDIF Selection
• Auto
• PCM
HDMI1 / 2 / 3 / 4 Input
• Digital
• Analogue
Audio Description
• Off
• Auto
Volume
Speakers
• Off
• On
Headphones
• Off
• On
Reset Sound Defaults
Adjusts the current volume level if it is extremely different from the
previous viewed channel or input mode
Adjusts the volume of individual channel or input mode
Adjusts the low frequency sound
If the back space between the TV and wall is over 30 cm, [Over 30cm]
is recommended.
If the back space between the TV and wall is within 30 cm, [Up to 30cm]
is recommended.
Selects multiplex sound mode (if available)
[Stereo]: Use this normally
[Mono]: When stereo signal cannot be received
[M1] / [M2]: Available while mono signal is transmitted
Analogue TV mode only
Selects the initial setting for audio tracks
If programme has both Dolby Digital and MPEG audio tracks, priority is
given to what you select
[Dolby D]: A method of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2ch) audio, these signals can also be
multi-channel audio.
[MPEG]: An audio compression method that compresses audio to small
size without any considerable loss of audio quality.
Digital TV mode only
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from the DIGITAL
AUDIO OUT terminal
[Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC (48 kHz)
multi-channel are output as Dolby Digital Bitstream.
MPEG is output as PCM.
[PCM]: Digital output signal is fixed to PCM.
For Digital TV mode, Video mode (p. 69) or Network video contents (p. 80)
Selects to fit the input signal (p. 90)
[Digital]: HDMI cable connection
[Analogue]: HDMI-DVI adaptor cable connection
HDMI input mode only
Useful for visually-impaired viewers
Sets to [Auto] to activate the description sound track if available
The availability of audio description sound track is indicated by [AD] in
the information banner (p. 19).
Digital TV mode only
Adjusts the volume for Audio Description
Digital TV mode only
Sets to [On] to activate the description sound track from TV speakers
Digital TV mode only
Sets to [On] to activate the description sound track from headphones
Digital TV mode only
Press the OK button to reset settings of the present [Mode], [Balance],
[Headphone Volume] and [Surround] in the Sound Menu to the default
39

Advertisement

Table of Contents
loading

Table of Contents