The Controls - Hotpoint CH60EKK Use And Installation Instructions

Switch on the electricity supply to the cooker at the Cooker Control Unit.
Hotplate Controls
Hotplate Controls
Right Front Control
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
8

THE CONTROLS

Dual Circuit
Oval Hotplate -
Right Front control
As each control knob is turned clockwise, numbers from 1 - 6 on the control knob
increase. Setting 6 is the highest/hottest and gives 100% power. Setting 1 is the
lowest/coolest and gives about 7% power. Variable power is obtainable on each of the
heating areas by selecting any number between 1 & 6.
This is to control a dual circuit oval hotplate with two elements. By turning the knob
clockwise both parts of the hotplate are switched on, numbers 1-4 on the control knob,
4 is the highest setting. With the knob turned anti-clockwise, only the inner part of the
hotplate is switched on, this is also indicated by numbers 1-4 on the control knob, 4 is
the highest setting. Variable power for either the whole or the inner part of the hotplate
is obtained by selecting any number between 1 & 4.
The off position is identified by an '0'.
The hob hot warning lights will operate soon after each of the heating areas have been
switched on. Each warning light will remain illuminated until each heating area has
cooled down.
Top Oven Neon
Grill
Control
Top
Oven
Control
Main Oven Neon
Main
Timer
Oven
Control