Troubleshooting - VuQube V10 Owner's Manual

NOTE: If you cannot lock onto the correct satellite, it is most likely that an object is blocking the signal. If this is the
case, move the vehicle to have an unobstructed view of the southern sky.
ERROR CODES
EO
E1
E2
Page 20

TROUBLESHOOTING

Section 6
POSSIBLE REASON
Remote is unable to send
commands to antenna.
Batteries low in remote control.
Remote is unable to receive
response from antenna.
Miscommunication between remote
and antenna.
COURSE OF ACTION
Turn remote OFF, wait 5 seconds, and
turn back ON.
Make sure receiver is turned ON.
Make sure coax from antenna is
connected to receiver.
Move remote closer to antenna.
Change batteries in remote control.
Move remote closer to antenna.
Call King Controls.