Control Water Valve - Hoshizaki FM-170EE-HC Service Manual

5. CONTROL WATER VALVE

1) Unplug the icemaker.
2) Close the water supply tap.
3) Remove the Inlet Hose from the water tap, and drain the Hose.
4) Remove the Top Panel and the Front Panel (Left).
5) Disconnect the Terminals from the Control Water Valve.
6) Loosen the Fitting Nut on the Control Water Valve Inlet, and remove the Control
Water Valve. Do not lose the Packing inside the Fitting Nut.
7) Remove the Reservoir Inlet Cover from the Control Water Valve.
8) Install the new Control Water Valve.
9) Assemble the removed parts in the reverse order of which they were removed.
10) Open the water supply tap.
11) Check for water leaks.
12) Refit the panels in their correct position.
13) Plug in the icemaker.
43