Table of Contents
Advertisement
5.4 DAY & NIGHT
Use this menu item to select COLOR, B/W, EXTERNAL, or
AUTO mode.
Use the LEFT and RIGHT buttons to select the mode.
Press ENTER to access the selected mode's setting
submenu, where applicable.
AUTO mode switches to a B&W feed in low light
conditions and then switches back to a Color feed
in the daytime. The switch-over moments for this
mode are triggered when the specified AGC level is
reached. Press Enter to open the submenu and set
the DELAY (the number of seconds that the camera
will wait before switching between DAY and NIGHT
modes if the threshold light level is reached – to
negate temporary light changes) and the D->N (the light level at which the camera will switch
from DAY mode to NIGHT mode), and the N->D (the light level at which it will switch from
NIGHT to DAY mode).
Note: The AGC Level must be set as middle or high in order to employ the auto switching
function.
B/W mode is ideal for NIGHTTIME. In this mode,
the camera is forced to deliver a B&W feed
during daytime and nighttime. Press Enter to
access this mode's submenu and set the BURST,
IR SMART and IR LED options ON/OFF.
The IR SMART option has a submenu where you
can select the IR LEVEL (intensity) and AREA. IR
Smart technology adjusts the IR lighting to focus
on a selected area in the image and to provide
just enough light to illuminate that area. The
AREA submenu lets you select which area and
size that would be. Select a dark part of the
image, will let the whole image become brighter.
15
Advertisement
Table of Contents
