Table of Contents
Advertisement
3.2 ADJUSTING THE CAMERA
Adjust the viewing angle to the desired direction. With this 3-axis positioning system, installers can
capture images from virtually any angle. The camera can be adjusted around these 3 axes:
1st axis
Use a hexagon key to loosen this screw to rotate the camera 360° around its long axis.
2nd axis
3rd axis
Use a hexagon key to loosen this screw to rotate the camera 90°
around this joint.
Twist the base carefully counterclockwise until it unscrews from
the lock ring to be able to rotate the camera 360° around this axis.
Once the camera is in position, turn the lock ring clockwise until it
locks against the base to fix the camera in position.
Tighten the set screw on the ring to fully secure the position.
8
Advertisement
Table of Contents
