Osd Operation - EverFocus HDCCTV EZH5242 User Manual

④
SCROLL DOWN
Press this button (by pressing the control stick in the "down" direction) to scroll the on-screen
cursor downwards between menu items.
⑤
SCROLL UP
Press this button (by pressing the control stick in the "up" direction) to scroll the on-screen
cursor upwards between menu items.

4.2 OSD OPERATION

1. Open the OSD menu
Press the ENTER button to open the OSD's main
("setup") menu on your screen.
2. Scroll with the cursor buttons to select menu
items
Use the  and  buttons to move the cursor up
and down to scroll to the desired menu items.
3. Toggle between the right-hand options (modes)
of each menu item
Use the  and  buttons to change the modes of menu items and to access the submenus
of those modes (to adjust the parameters or values of submenu items – where applicable).
Menu items with a "<┘" symbol at the end contain submenus. (If the right-hand menu title
is "SET", it means that there are no modes to choose from, only a settings submenu for the
left-hand main menu item.)
4. Open submenus
Right-hand items (or "modes") with a "<┘" symbol at the end contain submenus. For
adjusting submenu items, select the desired menu item with the  and  buttons, then
select the desired submenu title (or "mode") to the right of the menu item with the  and
 buttons, then press ENTER to open the submenu.
5. Return to the previous page or exit the OSD quickly
Scroll to RETURN and scroll between the RET and END options. If RET is selected, press
ENTER to return to the previous page. If END is selected, press ENTER to exit the OSD.
6. Exit the OSD menu
Scroll to EXIT and press the ENTER button to exit the OSD menu.
11