Table of Contents
Advertisement
d. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive and then click on the [Next] button.
e. Click on the [Next] button in the window that appears. Afterwards, for
Windows 98 users, please skip to Step 4.
f. Windows 2000 users – During the process of the installation, a message
"Digital Signature required" might be prompted. Please ignore it, and click
on Yes to continue the installation without any misgiving at your scanner
functioning. Afterwards, please skip to Step 4.
3. For Windows XP & Me
a. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive.
b. Select
"INSTALL
RECOMMENDED" and click on the [Next] button.
c. Click on the [Next] button in the window that appears.
4. When the system completes the installation, click on the [Finish] button.
5. Follow the on-screen instructions to install all software that your new USB
scanner requires.
6. After the software is installed, close all open applications and click on the [Finish]
button to restart your computer.
If the scanner installation is not started and displayed
automatically on the screen, click [Start], select [Run] and type in
[d:\setup] (where d: is the drive letter assigned to the CD-ROM
Attention
drive of your computer.)
If you work with Windows 2000/XP, you have to log on with an
administrator user name in order to install or uninstall software.
Software Setup Troubleshooting
Carefully review the steps outlined in this guide and the Quick Installation Guide
that accompanied your scanner.
If you are still having problems, please check that:
• You have 160MB of free space on your hard disk drive.
• The scanner is plugged in and has power.
• You are using the USB cable supplied with the scanner.
• The square end of the USB cable is plugged into the rear of the scanner.
THE
SOFTWARE
7
AUTOMATICALLY
Advertisement
Table of Contents
