Table of Contents
Advertisement
Attention
3. Place the film holder on the scanner glass, and align the positioning aids of the
film holder to fit into the indentations of the scanner housing. The arrow sign of
the particular film compartment must be in alignment with the inverse-arrow sign
carved on the scanner housing.
If you are scanning 35mm slides, place the film holder on the
scanner first, and then place the slides in the holder.
When inserting the 4"x5" (102x127 mm) sheet film, move the
film forward within the film compartment until the opposite end
of the film gets aligned with the arrow sign of the 4"x5" mark on
the right side of the film holder.
If you have only one 35mm filmstrip to scan, you can choose any
of the three compartments on the film holder for filmstrips.
14
Advertisement
Table of Contents
