Ricoh SP 200SF Operating Instructions And User Manual page 86

6. Sending and Receiving a Fax
6. If you have more originals to scan, press the [1] key within 60 seconds, place the next
original on the exposure glass, and then press the [OK] key. Repeat this step until all
originals are scanned.
7. When all originals have been scanned, press the [2] key to start sending the fax.
Specifying the destination using the redial function
This function saves time when you are sending to the same destination repeatedly, as you do not have to
enter the destination each time.
1. Press the [
2. Place the original on the exposure glass or in the ADF.
3. Press the [ ] or [ ] key to select [Redial], and then press the [OK] key.
4. Press the [
Specifying the destination using the broadcast function
You can send a fax to multiple destinations simultaneously.
84
] key.
CTT102
] key.
CTT008