Ricoh SP 200SF Operating Instructions And User Manual page 171

Message
The connection with the FTP/
Communication Error
SMTP/SMB server was lost
#### Server
while sending or receiving data.
The password entered to access
Invalid Password
the FTP/SMTP/POP3/SMB
#### Server
server is invalid.
A connection with the FTP/
Failed To Connect
SMTP/POP3/SMB server is
#### Server
failed.
The assigned file names range
from SIG000101 to
SIG999901. If the file name
assignment passes SIG999901,
the naming starts over from
File Over
SIG000101. If the name of the
new file is the same as an
existing file for the same
destination, the new file cannot
be stored.
You can only scan up to 99
Page Over
pages at a time.
Data sent from the machine has
#### Server Error not been stored on the
FTP/SMB server.
The SMTP server's memory
SMTP Server Full reached capacity during e-mail
transmission.
Causes
If the problem involves the FTP/SMB
server, check the [Edit Network Scan
Destination] setting in Smart Organizing
Monitor.
If the problem involves the SMTP server,
check the [Server Properties...] setting in
Smart Organizing Monitor.
For future reference, make a note of the
correct password and keep it safe.
If the problem involves the FTP/SMB
server, check the [Edit Network Scan
Destination] setting in Smart Organizing
Monitor.
If the problem involves the SMTP/POP3
server, check the [Server Properties...]
setting in Smart Organizing Monitor.
Remove or rename the existing file of the
same name.
Set the number of pages to 99 or fewer.
Reduce the number of pages or send the
file at a lower resolution.
Check the SMTP server setting.
Reduce the number of pages or send the
file at a lower resolution.
Error and Status Indicate on the Control Panel
Solutions
169