The Trade scroll saws takes a 5 Amp 20 x 5mm glass fuse,
follow the instrctions below on how to change the fuse.
1. Unplug the scroll saw from the mains.
2. Unscrew the fuse cap to the rear of the scroll saw
and remove the 5 AMP fuse.
Code
Model
Rating
Power
Throat
Stroke
Cuts per Minute
Max Depth of Cut
Noise Level dB (A)
Table Size
Arm Tilt
Overall L x W x H
Weight
101771
AT406SS (KC-16)
Trade
230V 50Hz 320W
406 mm
18 mm
400 -1,400
51 mm
67dB(A)
305 x 470 mm
Left 35° Right -45°
686 x 380 x 432 mm
24.5 kg
Maintenance, Adjustments & Servicing
3. Insert a new 5 AMP fuse into the end cap holder.
4. Re-insert the fuse assembly and finger tighten.
101772
AT535SS (KC-21)
Trade
230V 50Hz 320W
535 mm
18 mm
400 -1,550
51 mm
67dB(A)
345 x 597 mm
Left 35° Right -45°
812 x 380 x 387 mm
29.5 kg
15
Lock nut
Tension screw
Changing the Fuse
Specifications
AT762SS (KC-30)
230V 50Hz 320W
400-1,550
358 x 825 mm
Left 35° Right -45°
1,100 x 394 x 387 mm
101773
Trade
762 mm
18 mm
51mm
67dB(A)
52 kg