Turning Off The Power - Dukane 8105H User Manual

Turning off the power

1.
Press the STANDBY/ON button on the
projector or the remote control.
The message "Power off?" will appear on
the screen for about 5 seconds.
2.
Confirm that there is nothing that the
lens door hits while closing. Press the
STANDBY/ON button again while the
message appears.
The projector lamp will go off, and the
POWER indicator will begin blinking in
orange. Then the POWER indicator will
stop blinking and light in steady orange
when the lamp cooling is complete.
Do not turn the projector on for about 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on. Such operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the
lamp.
WARNING
prevent an injury.
►Do not touch around the lamp cover and the exhaust vents during use or just
after use, since it is too hot.
►Remove the power cord for complete separation. The power outlet should be
close to the projector and easily accessible.
NOTE • Please power off the projector after any connected devices are
powered off.
• This projector has the AUTO POWER OFF function that can make the
projector turn off automatically. For more information, please see the "Operating
Guide" in the CD.
►Be careful not to pinch your finger with the lens door, to
STANDBY/ON button
POWER indicator
14
MY SOURCE/
MY SOURCE/
VIDEO COMPUTER COMPUTER DOC.CAMERA
VIDEO DOC.CAMERA
AUTO
ASPECT SEARCH BLANK
PAGE VOLUME
MAGNIFY FREEZE
UP
ON AUTO ＋
ASPECT SEARCH BLANK
DOWN
OFF ー
KEYSTONE MY BUTTON MUTE
1 2
MAGNIFY FREEZE PAGE VOLUME
FOCUS D-ZOOM
- + - +
UP
ON
POSITION MENU
ENTER
DOWN
ESC RESET
OFF
KEYSTONE MY BUTTON MUTE
1 2
MENU
POSITION
ENTER
RESET
ESC