Chapter 6 Lan Setup; Lan Settings - EnGenius ENH700EXT User Manual

Wireless concurrent ap

Hide thumbs Also See for ENH700EXT:

Table of Contents

Chapter 6 LAN Setup

This chapter describes the ENH700EXT Local Area Network (LAN) settings.

Note: Changing LAN IP address changes the LAN Interface IP address. When you click Apply, the Web

Configurator automatically redirects you to the new IP address .

LAN IP

IP Address

IP Subnet Mask

Default Gateway

802.1d Spanning Tree

DHCP Server

Lease Time

Start IP

Specify the IP address of the ENH700EXT LAN port.

Specify the subnet mask of the ENH700EXT LAN port.

Specify the default gateway of the ENH700EXT LAN port.

Enable or disable Spanning Tree.

Enable or disable the DHCP server to allow automatic allocation of IP addresses to

LAN client PCs. If you disable DHCP Server, you must configure your PC's local IP

address to access the Web Configurator.

Specify the amount of time a DHCP network user is allowed connection to the

ENH700EXT with their current dynamic IP address.

Specify the starting IP address range for the pool of allocated for private IP

addresses. The starting IP address must be on the same subnet as the ending IP

Table of Contents