Chapter 9 Lan Setup; Ip Settings - EnGenius ENH Series User Manual

Chapter 9 LAN Setup

This chapter describes the OM2P-LC/OM2P-HS Local Area Network (LAN) settings.

9.1 IP Settings

This section is only available for Non-Router Mode. IP settings lets you configure the OM2P-
LC/OM2P-HS LAN port IP address.
IP Network Setting
static IP address
IP Address
LC/OM2P-HS. IP Suet Mask
HS subnet mask. Default Gateway
LC/OM2P-HS default gateway. Primary DNS Enter the
OM2P-LC/OM2P-HS primary DNS. Secondary DNS Enter
the OM2P-LC/OM2P-HS secondary DNS.
Accept / Cancel
If you change the LAN IP address, you will be directed to the new IP address after you click
Apply.
Select whether the OM2P-LC/OM2P-HS IP address will use the
specified in the IP Address field or be obtained automatically
when the OM2P-LC/OM2P-HS connects to a device that has a
DHCP server .
Enter the IP address of the OM2P-
Enter the OM2P-LC/OM2P-
Enter the OM2P-
Click Accept to confirm the changes or Cancel to cancel and
return previous settings.