Table of Contents
Advertisement
Resetting the DI-824VUP to the
Factory Default Settings
After you have tried other methods for troubleshooting your network, you
may choose to Reset the DI-824VUP to the factory default settings.
To hard-reset the D-Link DI-824VUP to the Factory Default Settings, please
do the following:
Locate the Reset button on the back of the DI-824VUP.
Use a paper clip to press the Reset button and
power on.
Hold for about 5 seconds (do not hold for too
long) and then release. (or, release when the
status LEDflashes.)
After you have completed the above steps, the DI-824VUP
will be reset to the factory default settings.
98
Advertisement
Table of Contents
