Table of Contents
Advertisement
Using the Configuration Menu
Tools > Admin
You can change the administrator and user passwords here. It is recommended that
you change the administrator password from the default setting.The default password
is blank (nothing).
Password
Remote
Management
IP Address
Port
To change the administrator or user password, enter the new
password twice to confirm.
Remote Management allows the device to be configured through
the WAN (Wide Area Network) port from the Internet using a web
browser. A username and password is still required to access the
browser-based management interface.
Internet IP Address of the computer that has access to the
DI-824VUP. If the IP Address is set to 0.0.0.0, this allows all Internet
IP addresses to access the DI-824VUP.
The port number used to access the DI-824VUP.
Example:http://x.x.x.x:8080, where x.x.x.x. is the WAN IP address of
the DI-824VUP and 8080 is the port used for the Web Management
interface.
53
Advertisement
Table of Contents
