Appendx C - Techncal Specficatons
When you receive your router, the default factory settings are in effect as listed in the table below. You may change any
of the network and wireless settings. If you perform a reset (hold the reset button on the back of the unit), the router
will reset with the following settings:
D-Lnk DIR-330 User Manual
Default Factory Settings
Setting
Username
Password
LAN IP Address
DHCP Server
DHCP IP Range
Filtering / Virtual Server / DMZ / Applications
Wireless Broadcast
SSID
WEP / WPA / WPA2
Wireless Channel
Default Value
admin
(leave blank)
192.168.0.1
Enabled
192.168.0.100 - 192.168.0.200
Disabled
Enabled
dlink
Disabled
6