Changing Direction Of The Drain Hose - Samsung AQV09PSB Manual

Drain hose installation
1. If necessary, connect the 2-meter extension drain hose to the drain hose.
2. If you use the extension drain hose, insulate the inside of the extension drain hose with a shield.
3. Fit the drain hose into 1 of 2 drain hose holes, then fix the end of the drain hose
tightly with a clamp.
4. Pass the drain hose under the refrigerant pipe, keeping the drain hose
tight.
5. Pass the drain hose through the hole in the wall. Check if it slants
downwards as seen in the picture.
37~38 for further details.
Inadequate installation may cause condensate water leakage.
furniture or floors.
Drain hose connection must be easy accessible and serviceable.

Changing direction of the drain hose

Change the direction only when it is necessary.
1. Detach the rubber cap with the plier.
2. Detach the drain hose by pulling it and turning to the left.
3. Insert the drain hose by fixing it with the screw into the groove of the drain
hose and the outlet of the drain pan.
4. Attach the rubber cap with a screwdriver by turning it to the right until it
fixes to the end of the groove.
5. Check for leakage on both side of the drain outlet.
Pour the water in direction of arrow.
Make sure that the water does not overflow onto the electrical part.
Maldive EUR_AQV09P@_IBIM_32436A_E.indd 33
Drain hose
Direction of the drained water
Drain hose hole
Shield
Extension drain hose
Screw hole
Drain hose
Drain pan outlet
Rubber cap
2010-11-11 15:02:25
Screw
33